Getting Started
1.12Emulation Selection
The following emulations are included in the PM Ser/Par:
S EPSON LQ / ESC/P2 | in Macro 1 | (Default) | |
S IBM ProPrinter XL 24 | in Macro 2 |
| |
S | IBM ProPrinter XL 24 AGM | in Macro 3 |
|
S | EPSON LQ / ESC/P2 | in Macro 4 |
|
To change from one emulation to another, follow the procedure below. The ex- ample shows the keys to press along with the display information for a change from EPSON LQ / ESC/P2 in Macro 1 to IBM ProPrinter in Macro 2.
Switch the printer ON. The display shows READY 1 ELQ. |
| |||||
|
|
| KEY |
| DISPLAY |
|
|
|
| [OFFLINE] | LOCAL | 1 ELQ | |
|
|
| [MACRO SELECTION] | MACRO 2 | r | |
|
|
| ||||
|
|
| (hold the key down and the available marcos are scrolling in the | |||
|
|
| display and stop pressing with selected Macro 2) |
| ||
|
|
| [ONLINE] | READY | 2 IPP | |
The information READY 2 IPP indicates the selected macro and the | ||||||
emulation of this macro, for example: |
|
| ||||
1 | ELQ | Macro 1 with Epson Emulation |
| |||
2 | IPP | Macro 2 with IBM Proprinter Emulation |
| |||
3 | AGM | Macro 3 with IBM Proprinter AGM Emulation |
| |||
4 | ELQ | Macro 4 with Epson Emulation. |
| |||
Note: A “Macro“ is a summary of application specific parameter settings. It is possible to have a total of four macros, each with a different summary of VALUE settings.
The settings selected and confirmed are only active until the printer is switched off. In order to prevent losing your new settings you can save them using the function SAVE MENU (see chapter 2.4.3 How to Save Settings.
