IBM 4400 manual Emphasized Print Reset, Emulation Reset

Chapter 2 Configuring the P-Series Emulation with Control Codes

Emphasized Print

ASCII Code SFCC E

Hex Code	SFCC 45
Dec Code	SFCC 69
Purpose	Selects emphasized character print format.
Comment	When the emphasized print control code is received, all
	characters are printed in emphasized print until reset by the
	emphasized print reset control code or printer reset.
	Emphasized print is ignored during superscript or subscript
	printing, and when 15-20 cpi characters have been selected.
Example	The following sample illustrates emphasized character printing.

Emphasized Print Reset

ASCII Code SFCC F

Hex Code	SFCC 46
Dec Code	SFCC 70
Purpose	Resets emphasized character printing.
Comment	The emphasized print reset control code only resets the
	emphasized print character attribute.
Example	See the Emphasized Print control code example (above) for an
	example of Emphasized Print Reset.

Emulation Reset

ASCII Code SFCC @

Hex Code	SFCC 40
Dec Code	SFCC 64
Purpose	Initializes all print mode related parameters to their power-up
	configuration values.
Comment	Print mode, line spacing, international language selection,
	margins, form length, skip-over perforation, and character pitch
	are reset to their power-up-configuration values. Character-by-
	character and line-by-line attributes are canceled. The vertical
	format unit is cleared. The current line is set to the top-of-form
	position. Interface parameters and printer protocol selection are
	not affected.

40