IBM 4400 manual Elongated Double High Print One Line Only, Ascii Code Sfcc h Hex Code

Chapter 2 Configuring the P-Series Emulation with Control Codes

Comment The international character set can also be selected from the control panel. The control code setting overrides the control panel character set selection. Values other than those selectable from Table 7 are ignored.

Example The following example illustrates international character selection using the IBM PC character set.

Elongated (Double High) Print (One Line Only)

ASCII Code SFCC h		BS
Hex Code	SFCC 68	08
Dec Code	SFCC 104	8
Purpose	Selects elongated (double high) character printing for one line
	only. Elongated characters are approximately double height but
	standard width.
Comment	The elongated character control code is a line-by-line print
	attribute; when the control code is received, one entire line of
	elongated characters is printed and then automatically reset.
	When configured for double high print, P-Series control code BS
	(hex 08) also selects elongated character printing for a single
	line.
	When using this feature with relative line slewing, the paper is
	moved n + 1 lines rather than n lines. See Chapter 9, “Vertical
	Page Formatting,” beginning on page 271 for more information
	on relative line slewing. When using small line spacing and the
	lines overlap, an unexpected print format may result.
Example	The following sample illustrates elongated character printing.

38