IBM 4400 manual Ascii Code Sscc V n m, Power Saver Time

Print Engine Options

Plot Attributes

ASCII Code SSCC V n ; m

Hex Code SSCC 56 n 3B m

Dec Code SSCC 86 n 59 m

Purpose Selects plot attributes in horizontal or vertical dots per inch (DPI).

where: n selects the horizontal DPI, range 001 through 999 DPI. m selects the vertical DPI, range 001 through 999 DPI.

This command has the same effect as changing the densities in the “Horizontal DPI” and “Vertical DPI” parameters under the “Plot Attributes” menu on the front panel. See yourUser’s Guide for details.

Power Saver Time

ASCII Code SSCC y n

Hex Code	SSCC 79 n
Dec Code	SSCC 121 n

Purpose	Sets the power saver time in seconds. Refer to Table 57 for valid
	values.
	Table 57. Power Saver Time
	n Value (ASCII)	Power Saver Time
	0001	Instant timeout
	0005	Five seconds
	0010	Ten seconds
	0015	Fifteen seconds
	0030	Thirty seconds
	0060	One minute
	0300	Five minutes
	0600	Ten minutes
	0900	Fifteen minutes
	1800	Thirty minutes
	2700	Forty-five minutes
	3600	One hour
	9999	No timeout

213