IBM 4400 p, hh, yyyy, xxxx, p

220
Chapter 7Bar Codes
where: P =activates printable data field variable
where:
p =location of printable data field
where: C=calculate and plot check digit (if available as an
option)
The default is no check digit if the check digit is
allowed to be optional.
where: H =activates the height variable
where:
hh =two-digit bar code height in 1/10 inches
Thedefa ult is as specified in the individual bar code
specifications.
where: D =activates dark bar code
Comment The x and y values are added to the current cursor position. You
cannot specify the upper left corner to be above the current print
position.
If
xxxx =0000 and yyyy =0000 and there are no line feeds, any
text following the bar code command prints next to the bar code.
Notice that the
x horizontal cursor position is automatically
updated. See Figure 3.
Figure 3. Bar Code Example1
Table 63. Printable Data Field
p
Selects Location
ASCII Hex
A41above
B 42 below (default)
N 4E none
Original
Cursor
Position
NewCur sor
Position
TEXT