Chapter 6 Configuring the Epson FX-1050 Emulation with Control Codes

Bell

ASCII Code BEL

Hex Code

07

Dec Code

7

Purpose

Sounds the printer's buzzer/beeper.

Comment

The BEL function sounds the buzzer/beeper for 0.2 seconds

 

upon receipt of this command.

Cancel Line

ASCII Code CAN

Hex Code 18

Dec Code 24

Purpose Clears all unprinted data from a line, but does not affect control codes.

Comment You can use this control code to delete a line, but do so with caution to avoid possible misprinting. This control code cancels the double wide attribute set by SO. No other print attributes are affected. The logical print head goes to the print position it had after the last CR or paper motion command.

Carriage Return

ASCII Code CR

Hex Code 0D

Dec Code 13

Purpose Prints the data in the buffer, then returns the logical print head to the left margin.

Comment Subsequent data are emphasized. A line feed is appended if the printer is configured from the operator panel for CR = CR + LF. When CR = CR + LF, this code cancels all one-line-only emphasis and font controls: double-wide from SO and ESC SO, and unidirectional printing from ESC <.

160

Page 160
Image 160
IBM 4400 manual Cancel Line, Ascii Code BEL Hex Code Dec Code Purpose