IBM 4400 Series Default Values and States, Series Default Settings Characteristic, Ascii USA

Chapter 2 Introduction

P-Series Default Values and States

The factory settings for the P-Series emulation menu options (for an 8” printer) are shown in Table 1. Table 1 also lists additional factory settings for parameters provided by the ASCII Emulation formatting menus. (The EMULATION menu options are described in the User's Guide). Host control codes can override many of the settings for these menu options.

Table 1. P-Series Default Settings

Characteristic	Default Setting
Select CPI	10.0 CPI
Select LPI	6.0 LPI
Typeface	Letter Gothic
Character Group	Standard Sets
Character Set	IBM PC
Primary Subset	ASCII (USA)
Extended Subset	Code Page 437
Horizontal DPI	120 DPI
Vertical DPI	72 DPI
Prop. Spacing	Enable
Italic Print	Disable
Slashed Zero	Disable
Left Margin	0 characters
Right Margin	0 characters
Top Margin	0 linespaces
Bottom Margin	0 linespaces
Print Char. Set
Define CR code	CR = CR
Auto LF	Disable
Define LF code	LF = CR + LF
*Advanced User:
Control Code 06	8.0 LPI
Control Code 08	Elongated
Bold	Disable

24