IBM 4400 manual Font Size, N4 Value Symbol Sets Printer Protocol

Chapter 7 The Super-Set Commands

Parameter n4 selects a 3-digit symbol set:

Table 47. n4 Value (Symbol Sets)

Printer Protocol	n4	Symbol Set
Proprinter XL	000	Code Page 437
	001	Code Page 850
All others	000	IBM PC
	001	Multinational
	002	ECMA-94 Latin 1
	003	DEC Multinational
	004	OCR-A
	005	OCR-B

Parameter n5 selects a 4-digit point size (1/4 point resolution). The horizontal pitch (cpi) is automatically adjusted based on the point size selected.

Examples The following command selects the Courier typeface, a fixed pitch font. It also sets the point size to 12, which corresponds to 6 lpi and 10 cpi.

SSCC F 93952;x;x;xxx;0048

The following command enables the left slant attribute, and sets the point size to 100.

SSCC F xxxxx;x;2;xxx;0400

The following command selects the Futura typeface, which is a proportional font. It also enables the bold print attribute, and disables the slant attribute.

SSCC F 91810;1;0;xxx;xxxx

Font Size

ASCII Code SSCC S n1 ; n2 ; n3 ; n4 ; n5 ; n6

Hex Code SSCC 53 n1 3B n2 3B n3 3B n4 3B n5 3B n6 3B Dec Code SSCC 83 n1 59 n2 59 n3 59 n4 59 n5 59 n6 59

Purpose Selects fixed pitch and proportional font attributes, with character size specified in terms of width and height (in inches).

Comment	Parameters n1 through n6 are specified as ASCII digit values. If
	a non-digit is used in any parameter, the value remains
	unchanged. The following paragraphs explain how to set various
	options using ASCII digit values for each parameter.
where:	Parameter n1 identifies a specific typeface. Enter the five-digit
	number representing the selected typeface. Fixed pitch spacing
	is used for the Letter Gothic (DP), Courier (NLQ), OCR-A, and
	OCR-B typefaces. All others use proportional spacing.

202