Chapter 5 Configuring the Proprinter III XL Emulation with Control Codes

Expanded (Double Wide) Print (One Line Only)

ASCII Code SO

ESC SO

Hex Code

0E

1B 0E

Dec Code

14

27 14

Purpose

Selects double wide print for one line only.

where:

If the emulation is set at 10 cpi, it is set to 5 cpi.

 

If the emulation is set at 12 cpi, it is set to 6 cpi.

 

If the emulation is set at 17.1 cpi, it is set to 8.55 cpi.

Comment

This expanded print control code is a line-by-line print attribute;

 

when the SO control code is received, the current line is printed

 

double wide and automatically reset.

 

This control code can be reset by a paper motion control code

 

(LF, VT, CR, etc.), by the DC4 (double wide cancel) code, CAN

 

or ESC W (double wide print). When set by SO, double wide

 

print is not cancelled by the Autowrap feature.

Example

The following sample illustrates Expanded Print for one line only.

 

Another example of expanded printing is shown for “Expanded

 

(Double Wide) Print,” ESC W on page 129.

Expanded (Double Wide) Print Reset (1 Line)

ASCII Code DC4

ESC DC4

Hex Code

14

1B 14

Dec Code

20

27 20

Purpose

Cancels expanded (double wide) print set by SO.

where:

If the emulation is set at 5 cpi, it is set to 10 cpi.

 

If the emulation is set at 6 cpi, it is set to 12 cpi.

 

If the emulation is set at 8.55 cpi, it is set to 17.1 cpi.

130

Page 130
Image 130
IBM 4400 manual Expanded Double Wide Print Reset 1 Line, Ascii Code DC4, ESC DC4