IBM 4400 manual Series XQ Default Values and States, Introduction

Chapter 3 Introduction

The emulation's response to several of the control codes depends on the configuration. For example, upon receipt of the carriage return control code, the emulation will either perform a carriage return function only, or a carriage return and line feed, based on the configuration for the CR function.

P-Series XQ Default Values and States

The factory settings for the P-Series XQ emulation menu options are shown in Table 12. Table 12 also lists additional factory settings for parameters provided by the ASCII Emulation formatting menus. (The EMULATION menu options are described in the User’s Guide). Host control codes can override many of the settings for these menu options

Table 12. P-Series Default Settings

Characteristic	Default Setting
Select CPI	10.0 CPI
Select LPI	6.0 LPI
Typeface	Letter Gothic
Horizontal DPI	120 DPI
Vertical DPI	72 DPI
Prop. Spacing	Enable
Italic Print	Disable
Slashed Zero	Disable
Left Margin	0 characters
Right Margin	0 characters
Top Margin	0 linespaces
Bottom Margin	0 linespaces
Print Char. Set
Define CR code	CR = CR
Auto LF	Disable
Define LF code	LF = CR + LF
*Advanced User:
Control Code 06	8.0 LPI
Compressed Print	Char 01 SOH
Bold	Disable
Elong/Alt. Font	Elng=BS Font=SO

60