Safety Regulations
The printer PP 806 (CI - 8060) fulfills the safety regulations according to UL 1950 and
VDE (IEC 950) and CNA/CSA C22.2 / No. 950 for computer systems.
The mains cable must be connected to a ground protected
The power plug must be easily accessible at any time so that it can be disconnected immediately in case of danger or for maintenance purposes. Comme le câble de secteur sert de dipositif
Before installing the printer, check the surrounding conditions in which the printer will be placed (see next page, Operating Environment).
During a thunderstorm you should never attempt to connect or disconnect any data transfer cables.
The power supply should only be opened and checked by authorized personnel. Repairs and maintenance may only be attempted by authorized personnel as well. Repairs done inappropriately may cause damage and severe danger for the user.
There is a warning symbol to draw the user's attention to possible injuries:
This symbol is visible when the rear cover has been opened. It indicates that the print head is extremely hot after long periods of printing.
Ce signal de danger se présente quand le cache derrière de l´imprimante soit retiré pour indiquer que la tête d´impression peut être extrèmement chaude après imprimer très longtemps.
I
