
Printer Operating
Single sheet:
Sonly form feed function. Either the form is fed into print position
or is ejected. Fanfold Paper:
1) Paper is in Park Position
Spaper is fed into print position.
2)Paper is in Print Position
Spaper is fed to the tear off position.
Spaper is fed into park position.
3)Paper is in Tear Off Position
Sprinter performs a form feed
Spaper is fed into park position (for this function the paper has to be torn off)
Sprinter performs a reverse form feed
The four macros are displayed by keeping the key pushed. The actual macro is displayed first. Release the key as soon as the desired macro is displayed. This one will be come the active one. How to confirm and save the selection see chapter 2.4.3 How to Save Settings.
Press the [Menu] key to activate the menu mode. The four arrows (up, down, right, and left) can be used as cursor keys to move within the menu tree. The menu tree is shown and explained on the page
To leave the menu mode press this key again
With this key a selection will be confirmed. To cancel the selection choose another item and press [Enter] again. The selection becomes effective by pressing the [Online/Offline] key.The selection remains active until the printer is powered off. If the selection should be available after power off it must be saved by means of the menu function „SAVE MENU“ see chapter 2.4.3 How to Save Settings.