Output Solutions C I - 8 0 6 0 manual F Buffer, Language, Program Update, Menu Access

Description of the Individual Menu Items

SDSR/CTS MODE (Only indicated if the serial interface is selected) Selectable are: IGNORE DSR+CTS, DSR+CTS ACTIVE, CTS ACTIVE, or DSR ACTIVE.

SI/F BUFFER

Buffer size in Kbyte. The maximum (factory setting) size is 64 Kbyte.

SLANGUAGE

The operator panel may display its messages in three languages. Select one out of the following: ENGLISH, DEUTSCH, or FRANCAIS.

SRECALL FACTORY

All standard default settings of the firmware will be restored. The contents of Page Counter and the Paper-in Adjust will not be changed. Use the function SAVE MENU if the standard settings shall be stored permanently.

SPROGRAM UPDATE

A new firmware version can be down loaded from the host system via the interface cable. All parameters will be reset to their factory default value.

SMENU ACCESS

There are two possibilities to define the user’s access rights to the menu.

SFULL ACCESS All functions can be used (default)

SNO ACCESS The menu is not accessible at all. Only the menu item TEST MODES is available.

Note: It is the system manager’s responsibility to grant access to the menu when NO ACCESS was selected.

4-10