Output Solutions C I - 8 0 6 0 manual Paper tears or jams, Single sheets are skewed

Troubleshooting and Diagnostics

6.4Operation-related Problems

SPaper is not positioned at perforation for tear-off

S Select the correct form length using the Set-up feature. S Reset top of form by moving the paper into park position.

SPaper tears or jams

S Examine the paper path; remove any obstacles

S Is the paper too loose or too tight between the tractors?

S If the transport holes are deformed at their outer edges, the paper is too taut.

S If the paper rises between the tractors it is too loose.

S Readjust the tractor spacing so that the paper lies smoothly but without any tension.

S Ensure that the paper is horizontally aligned on the pins. S Paper moves out of one tractor.

SParking paper and resetting top of form S Tear off the paper at the perforation.

S Press .

S Press until the paper is in the park position.

S Press . Printing will resume at the top of the next form.

SPrint head carriage does not move smoothly / does not move at all S Examine the paper path. Remove any obstacles.

S Examine the carriage area for obstacles. Remove where necessary.

Press the key when the paper path is cleared.

S Make sure that the transport lock has been removed.

SSingle sheets are skewed

S Adjust ASF cassette paper guides.

S You will find more information in chapter 7.2 ASF Cassette.

6-8