Getting Started
1.8Paper Loading
There are three possibilities for paper feeding:
SFanfold paper with the two tractor cassettes;
SSingle sheets through the manual paper path;
SWith the automatic sheet feeder cassettes
1.8.1 Paper Source Selection
The basic selections for PAPER SOURCE are:
STRACTOR (Default TRACTOR LOWER, indicated by ’)
SMANUAL
Select 'TRACTOR L/U' as paper source on the operator panel
The following diagram shows which keys to press and what is displayed on the operator panel.
Power the printer ON: |
|
|
KEY | DISPLAY |
|
[OFFLINE] | LOCAL | 1 ELQ |
[MENU] | TEST MODES | º |
[DOWN] | DEFINE MACRO | º |
[RIGHT] | » SELECT MACRO | º |
[DOWN] | » PAPER SOURCE | º |
[RIGHT] | » TRACTOR LOWER | r |
[DOWN] | » TRACTOR L/U |
|
[ENTER] | » TRACTOR L/U | r |
[ONLINE] | READY | 1 ELQ |
Note: The settings selected and confirmed are only active until the printer is switched off. In order to prevent losing your new settings you can save them using the function SAVE MENU (see chapter 2.4.3 How to Save Settings.
