Adjustments and functions (continued)

< AUTO-adjustment >

The projector will automatically adjust four items (V POSIT, H POSIT, H PHASE, H SIZE, White level). When AUTO is selected (the cursor is moved from Manual Operation towards the right) the AUTO Confirm screen shown below will be displayed.

< AUTO-adjustment Confirm Screen >

While the AUTO confirmation screen is displayed as illustrated on the upper right, if you shift the cursor upward and select AUTO, the projector will perform auto-adjustment.

It will become as illustrated on the lower right.

If CANCEL is selected for three seconds, or if the RESET button on either the unit or the remote control is pressed, the green cursor will return to the value for the selected item (Manual Operation)

< During AUTO-adjustment >

At the lower right of the screen the word <AUTO> will flash in green letters.

When the auto-adjustment is completed the word <AUTO> will disappear. The auto-adjustment of the white level is cancelled by input switching and signal mode change.

S E T U P I N P U T I M A G E O P T .

VOLUME

 

 

BRIGHT

 

 

CONTRAST

 

 

V POSIT

123

AUTO

H POSIT

AUTO 111

 

H PHASE

CANCEL

 

H SIZE

1024

 

COLOR BAL

R

B

AUTO

Caution

• When start up screen is displayed ("NO INPUT IS DETECTED" or "SYNC IS OUT OF

RANGE" is displayed), SETUP menu items other than VOLUME cannot be set.

 

•TINT cannot be adjusted with PAL/SECAM video signal input.

•TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

•V.POSIT, H.POSIT, H.PHASE and H.SIZE cannot be adjusted with a VIDEO signal input.

•Auto-adjustment will take about 10 to 15 seconds to complete.

•In some cases auto-adjustment may not function normally, depending on the type of computer to which the unit is connected, and the signal sent.

•Auto-adjustment may not perform normally with some images. Do not use with animated or dark images.

•Carry out the auto-adjustment when the application, which is activated on the computer, is set to the maximum display.

•After auto-adjustment the screen may become slightly dark due to the auto-adjustment of the signal level.

•Auto-adjust can not be performed during freeze, during magnify, or during the initial screen display ("NO INPUT IS DETECTED" or "SYNC IS OUT OF RANGE").

INPUT

The menu INPUT serves for the selection of input source.

S E T U P

I N P U T

I M A G E O P T .

SETUP

INPUT

IMAGE OPT .

 

 

 

 

 

 

 

 

 

 

S Y S T E M

 

RGB1

 

 

RGB1

 

 

AUTO

 

RGB2

 

 

RGB2

 

 

NTSC

 

VIDEO

 

 

V I DEO

 

 

PAL

 

 

 

 

 

 

 

 

 

 

SECAM

 

 

 

 

 

 

 

 

 

 

NTSC4.43

 

 

 

 

 

 

 

 

 

 

M-PAL

 

 

 

 

 

 

 

 

 

 

N-PAL

 

 

 

 

 

 

 

 

 

 

Adjustment Item

Details of adjustment

 

 

RGB 1

Selects the RGB 1 terminal.

 

 

RGB 2

Selects the RGB 2 terminal.

 

 

VIDEO

Selects the VIDEO terminal.

 

 

 

Selects the video signal systems. In normal circumstances, select AUTO. AUTO does not

SYSTEM

support N-PAL.

When the picture (Video) is abnormal (no color), selects the input signal mode (NTSC,

 

 

PAL, SECAM, NTSC4.43 M-PAL and N-PAL). To input N-PAL signals, select N-PAL.

 

 

18

Page 17 Page 19
Page 18
Image 18
Hitachi CP-X940W/E specifications Input, AUTO-adjustment Confirm Screen, During AUTO-adjustment
Page 17 Page 19

CP-X940W/E specifications

The Hitachi CP-X940W/E is a high-performance projector that stands out for its vibrant image quality, versatile features, and user-friendly design. This projector is particularly suited for educational and corporate environments, delivering clear and impactful presentations.

One of the flagship features of the CP-X940W/E is its impressive brightness level, reaching up to 4,000 lumens. This ensures that images remain sharp and vivid even in well-lit rooms, making it ideal for classrooms and conference halls. Additionally, the device has a contrast ratio of 10,000:1, which helps in producing deep blacks and bright whites, enhancing the overall picture quality. It supports a native WXGA resolution (1280 x 800), providing a great balance of detail and clarity for various content types.

The CP-X940W/E employs advanced 3LCD technology, which outshines typical DLP projectors by delivering more accurate colors and consistent brightness across its color spectrum. This technology significantly reduces color break-up and ensures smooth, natural color transitions, making it an excellent choice for showcasing high-definition content.

Connectivity is another strong point of the Hitachi CP-X940W/E. It features multiple input options, including HDMI, VGA, and USB ports, as well as support for wireless display technology. This versatility allows users to connect a wide range of devices from laptops to smartphones effortlessly. The projector also supports network control and monitoring, enabling IT managers to oversee multiple projectors in an organization with ease.

The projector is designed for longevity and ease of maintenance. It has a lamp life of up to 7,000 hours in eco mode, reducing the frequency of replacements and lowering overall operating costs. Its filter-free design means less maintenance hassle, contributing to a lower total cost of ownership.

Additionally, the Hitachi CP-X940W/E includes user-friendly features such as automatic keystone correction and a built-in speaker, simplifying setups and providing enough sound for small to medium-sized rooms. The projector also comes with a comprehensive remote control, enhancing convenience during presentations.

In summary, the Hitachi CP-X940W/E is a robust projector that combines advanced display technologies, flexible connectivity options, and user-centric features. It's an ideal choice for those looking to enhance their visual presentations, making it a trusted tool for education and business alike.
Top Page Image Contents