Lamp (continued)

5

Install the lamp cover and fix it using screws.

 

 

• To prevent burn, install the lamp cover and secure it using the screws.

 

 

 

• Do not turn on the power with lamp cover removed.

 

 

 

Lamp cover

 

 

 

 

 

 

 

• Whenever the lamp is replaced, reset the total operation time of the lamp. Do not reset if

 

 

the lamp has not been replaced.

 

 

• Do not perform resetting without changing the lamp, as this can cause lamp breakage.

Screw

2. Reset the lamp time

If you have replaced the lamp after the lamp replacement time had expired, perform the procedure explained below within 10 minutes after the power is turned on. The power will turn off automatically when the 10-minute period expires.

 

POSITION ON

LASER

 

 

 

 

 

 

 

 

STANDBY/ON

3

 

 

 

 

INPUT

 

 

 

 

MUTE

 

 

 

1

 

MENU

2

RESET

RIGHT

 

3

MENU ON

MOUSE ON

1, 2

 

 

 

 

 

RESET

 

BLANK

TIMER

 

 

 

 

RGB

VIDEO

 

 

 

 

INPUT

 

 

 

ENGLISH

1)Press the RESET button on projector for 3 seconds or remote control TIMER button for 3 seconds and display the total lamp used time.

When accumulated operation time of the lamp reaches 1700 hours, the following display will appear at the bottom of the screen.

2)Press the RESET button on projector or remote control MENU ON button during displaying the lamp used time.

3)Select the “0” on the screen using the MENU ( ) button or DISK PAD.

LAMP 1700 h

LAMP 1700

0

 

CANCEL

 

 

 

 

 

Message table

On-screen display

The following messages are displayed on the screen.

MESSAGE

Action

 

 

CHANGE THE LAMP

The lamp has been in service for long. Replacement with a new lamp is

AFTER REPLACING LAMP,

recommended. The lamp will go off automatically when the lamp replacement

RESET THE LAMP TIMER.

time is exceeded. *1

CHANGE THE LAMP

The total lamp service time will exceed the lamp replacement time in * hours.

AFTER REPLACING LAMP,

The lamp will go off automatically when the lamp replacement time is

RESET THE LAMP TIMER.

exceeded. Replace with a new lamp before that. *1

THE POWER WILL TURN

The asterisk (*) indicates the number of hours remaining before the lamp goes

OFF AFTER * Hr.

off automatically.

Blinking of

The total lamp service time has exceeded the lamp replacement time. The lamp will go

CHANGE THE LAMP

off automatically about 10 minutes after it starts blinking. Replace with a new lamp.*2

 

 

NO INPUT IS DETECTED

Signal is hot input. (See page 20, 21)

 

 

SYNC IS OUT OF RANGE

The horizontal frequency of the input signal exceeds the range of the projector,

it cannot be displayed. (See page 21, 22)

 

 

 

*1 This message are not displayed after 3 minutes.

But this message are displayed when you turn on the power again.

*2 It is possible to again turn on the power, however the power will go off after about 10 minutes.

31

Page 31
Image 31
Hitachi CP-X940W/E specifications Lamp, Message table, Install the lamp cover and fix it using screws, On-screen display

CP-X940W/E specifications

The Hitachi CP-X940W/E is a high-performance projector that stands out for its vibrant image quality, versatile features, and user-friendly design. This projector is particularly suited for educational and corporate environments, delivering clear and impactful presentations.

One of the flagship features of the CP-X940W/E is its impressive brightness level, reaching up to 4,000 lumens. This ensures that images remain sharp and vivid even in well-lit rooms, making it ideal for classrooms and conference halls. Additionally, the device has a contrast ratio of 10,000:1, which helps in producing deep blacks and bright whites, enhancing the overall picture quality. It supports a native WXGA resolution (1280 x 800), providing a great balance of detail and clarity for various content types.

The CP-X940W/E employs advanced 3LCD technology, which outshines typical DLP projectors by delivering more accurate colors and consistent brightness across its color spectrum. This technology significantly reduces color break-up and ensures smooth, natural color transitions, making it an excellent choice for showcasing high-definition content.

Connectivity is another strong point of the Hitachi CP-X940W/E. It features multiple input options, including HDMI, VGA, and USB ports, as well as support for wireless display technology. This versatility allows users to connect a wide range of devices from laptops to smartphones effortlessly. The projector also supports network control and monitoring, enabling IT managers to oversee multiple projectors in an organization with ease.

The projector is designed for longevity and ease of maintenance. It has a lamp life of up to 7,000 hours in eco mode, reducing the frequency of replacements and lowering overall operating costs. Its filter-free design means less maintenance hassle, contributing to a lower total cost of ownership.

Additionally, the Hitachi CP-X940W/E includes user-friendly features such as automatic keystone correction and a built-in speaker, simplifying setups and providing enough sound for small to medium-sized rooms. The projector also comes with a comprehensive remote control, enhancing convenience during presentations.

In summary, the Hitachi CP-X940W/E is a robust projector that combines advanced display technologies, flexible connectivity options, and user-centric features. It's an ideal choice for those looking to enhance their visual presentations, making it a trusted tool for education and business alike.