Hitachi CP-X995W user manual Image Menu Description, MyScreen, Mirror, Posit

OPERATIONS (continued)

Image Menu

The following adjustments and settings are available when IMAGE is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons.

SETUP INPUT	IMAGE	OPT.
BLANK	MyScreen
START UP	ORIGINAL

MyScreen

MIRROR

P.IN P. POSIT

P.IN P. INPUT

GAMMA

Table 6. Image Menu

Item	Description
	Select Blank Screen: Select the screen in case of the BLANK mode with the /
	button.The selected one (MyScreen, ORIGIAL or one colors) is displayed when the
	BLANK mode is ON.
BLANK	MyScreen is a mode that the customer-customized screen is displayed. This is the
	blue screen at the factory setting. Refer to the description of MyScreen below.
	ORIGINAL is a mode that the factory fixed screen is displayed.
	• When MyScreen or ORIGIAL is selected, the screen is going to the black after
	several minutes.

Select Start Up Screen:Select the screen in case of no signal input with the / button. The selected one (MyScreen, ORIGIAL or TURN OFF) is displayed when no signal is input

MyScreen is a mode that the customer-customized screen is displayed. This is the START UP blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL is a mode that the factory fixed screen is displayed. TURN OFF displays the blue screen.

•When MyScreen or ORIGIAL is selected, the screen is going to the black after several minutes.

	Set MyScreen Mode: Select the EXECUTE with the			button to display the
	MyScreen menu and set the MyScreen mode for BLANK and START UP functions.
	ESC clears and closes the menu box.
	NORM. is default of the MyScreen menu.
	FREEZE freezes the image and displays the frame to capture.
	Press the	button after freeze to go to the MyScreen Capture Position mode.
	In the MyScreen Capture Position mode, the buttons			, , and	allow to
	move the frame to capture.
MyScreen	After adjusting the position, press the KEYSTONE button to go to the MyScreen
	Display Size mode.
	To cancel freezing and return to the NORM. of the MyScreen menu, press the
	RESET button.
	In the MyScreen Display Size mode, select the magnification x1, x2 or FULL with the
	button	/ .
	After selecting the magnification, press the KEYSTONE button to go to the CAPT.
	mode and start capturing.
	To return to the MyScreen Capture Position mode, press the RESET button.
	CAPT. executes a capturing the image. It requires about 20 seconds. After capturing,
	the captured image will be displayed for about 10 seconds.
MIRROR	Select Mirror Status: Select mirror status with		/	button.

P. IN P.	Select Position of P. in P. Display : Press the					/	button.
	↔		↔	↔
POSIT
	• P.IN P. function superimposes a video image over RGB or DVI signals.
P. IN P.	Select signal of P. in P. Display : Press the					/	button.
INPUT	VIDEO	↔	S-VIDEO	↔	COMPONENT
GAMMA	Select Gamma Mode: Select the gamma mode with the / button.
	NORMAL	↔	CINEMA	↔	DYNAMIC

ENGLISH-14

Downloaded from www.Manualslib.com manuals search engine