![](/images/backgrounds/112235/bg17.png)
ENGLISH-22ENGLISH-22
TT
TTRR
RROO
OOUU
UUBB
BBLL
LLEE
EESS
SSHH
HHOO
OOOO
OOTT
TTII
IINN
NNGG
GG
((
((cc
ccoo
oonn
nntt
ttii
iinn
nnuu
uuee
eedd
dd))
))
Symptom
Before requesting repair, check in accordance with the following chart. If the situation cannot be
corrected, then contact your dealer.
Table 11. Symptom
Symptom Possible cause Remedy Page
The power is not
turned on.
The main power switch is not
turned on. Turn on the main power switch.
8,9
The power cord is
disconnected.
Plug the power cord into an AC
power outlet.
No video or audio.
The input is not correctly set. Use the projector or remote control
transmitter to set. 10
No signal input. Connect correctly. 7,8
Video is present but
no audio.
The projector is not correctly
connected. Connect correctly. 7,8
The volume is set to minimum.
Press VOLUME on the remote
control or display the menu screen
and adjust the volume.
11,15
Mute is turned on. Press the MUTE button. 11
Audio is present but
no video.
The projector is not correctly
connected. Connect correctly. 7,8
The brightness adjustment knob
is rotated fully clockwise.
Select BRIGHT with the MENU
button and the press the button. 12
The lens cap is still attached. Remove the lens cap. 9
Colors are pale and
color matching is
poor.
Color density and color
matching are not correctly
adjusted.
Adjust the video. 12
Images are dark.
Brightness and contrast are not
correctly adjusted. Adjust the video. 12
The lamp is nearing the end of
its service life. Replace with a new lamp. 17
WHISPER mode is set. Clear WHISPER mode. 15
Video is blurred. Focus or H PHASE is out of
adjustment. Adjust the focus or H PHASE. 9,12