Hitachi CPX6 user manual MIU Menu, Live Mode, Pc-Less, Presentation

MIU Menu

MIU Menu

Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network.

Select “MIU” from the main menu to access the following functions.

Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table.

See the User’s Manual - Network Functions for details of MIU operation.

2+%674'	.+8'/1&'
	2%.'5524'5'06#6+10
02	672
/#)'	G5*16
5%4''	5'48+%'+0(14/#6+10
/+7126+10
'#5;/'07

NOTE • The factory default setting for DHCP is OFF. If your network has DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY automatically, please set DHCP to ON. ( 2.5.2 Network Settings of the User’s Manual - Network Functions)

•If you are not utilizing SNTP ( 2.5.7 Date/Time Settings of the User’s Manual - Network Functions), then you must set the DATE AND TIME (51) during the initial installation.

Item	Description
	Selecting this item sets the projector onto the “Live Mode”.
	On the “Live Mode”, the projector displays the images from the PC
LIVE MODE	via Network, supported by “MIU Live Viewer”. ( 1.1 Live Mode of
	the User’s Manual - Network Functions)
	In the Live Mode, the message “Waiting for connection” will be
	displayed until the “MIU Live Viewer” start to send computer screen
	image.
	Selecting this item displays the PC-LESS PRESENTATION menu.
PC-LESS	Using the menu is able to make the projector
	display the images stored in SD Memory Card or	6*7/$0#+.
		5.+&'5*19
PRESENTATION	USB memory, and realizes a presentation without	4'	64;
	PC. ( 1.2 PC-LESS Presentation of the User’	&+52.#;5+<'
		-';%10(+)
	s Manual - Network Functions)

(continued on next page)

49