Hitachi CPX6 user manual Connecting your devices, VCR/DVD player

Setting up

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect.

Please refer to the following illustrations to connect them.

VCR/DVD player

PC

C	COMPONENT			AUDIO OUT		VIDEO OUT
	R/PR	CB/PB	Y	L	R

			Speakers
AUDIO OUT	S-VIDEO OUT	AUDIO OUT	AUDIO
L R		L R	IN

USB-A	USB
LAN	storage

RGB OUT

OUT

AUDIO

	USB STORAGE	USB		AUDIO OUT
			IN
LAN	DC 5V 0.5A
			S-VIDEO	AUDIO IN
	K		VIDEO

NOTE • The SD card slot is in the side opposite to the lamp cover of the projector. Please see the “Using an SD card” (10).

•To display a signal from LAN, USB STORAGE or SD CARD, select the input signal to “MIU”. (15)

•The COMPUTER IN port can support a component signal also. For more information, please see the description of the COMPUTER IN item of the INPUT menu (30).

WARNING ►Do not disassemble or modify the projector and accessories. ►Be careful not to damage the cables, and do not use damaged cables.

CAUTION ►Turn off all devices and unplug their power cords prior to connecting them to projector. Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector.

►Use appropriate accessory or otherwise designed cables. Ask your dealer about non-accessory cables which may have to be of a specific length or equipped with a core. For cables with a core only at one end, connect the end with the core to the projector.

►Make sure that devices are connected to the correct ports. An incorrect connection may result in malfunction or damage to the device and the projector.