English
(3)Insert the saw blade all the way into the small slit of the plunger tip with the lever pushing. You can mount this blade either in the upward or downward direction. (Fig. 4, Fig. 5)
Blade
Slit of plunger
know it is properly mounted if it clicks and the lever moves slightly. (Fig. 7)
Blade
Lever
Fig. 7
Blade
Fig. 4
CAUTION:
When pulling the saw blade, be absolutely sure to pull it from the back. Pulling other parts of the blade will result in an injury.
Slit of plunger
Fig. 5
(4)When you release the lever, the spring force will return the lever to the correct position automatically. (Fig. 6)
Lever
Fig. 6
(5)Pull the back of the saw blade two or three times by hand and check that the blade is securely mounted. When pulling the blade, you will
7.Dismounting the blade
(1)Turn on and off the switching trigger several times so that the lever can jump out of the front cover completely. Thereafter, turn off the switch and unplug the power cord. (Fig. 2)
CAUTION:
Be absolutely sure to keep the switch turned off and the power cord unplugged to prevent any accident.
(2)After you have pushed the lever in the direction of the arrow mark shown in Fig. 3, turn the blade so it faces downward. The blade should fall out by itself. If the blade doesn’t fall out, pull it out by hand.
CAUTION:
Never touch the saw blade immediately after use. The metal is hot and can easily burn your skin.
10