7.Mounting drill bits (Fig. 2)

Tighten drill bits with the chuck wrench. There are three holes in which the chuck wrench should be inserted. Tighten them equally in turn at three holes, without tightening them only at one hole. The drill bit can be removed in the opposite method as mentioned above.

8.Confirm the direction of bit rotation (Fig. 3)

The bit rotates clockwise (viewed from the top side) by pushing the R-side of the reversing switch lever. The L-side of the lever is pushed to turn the bit counterclockwise.

CAUTION

Never change the direction of bit rotation while operating.

Turn the power switch OFF before changing the direction of bit rotation; otherwise, burning of the motor will result.

9.Fixing the side handle

Screw the side handle into the gear cover.

HOW TO USE

CAUTION:

To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle when the drill bits and other various parts are installed or removed. The powerswitchshouldalsobeturnedoffduring a work break and after work.

English

Chuck

Wrench

Drill chuck

Fig. 2

R

L

Reversing switch lever

Fig. 3

Housing

Switch lever

Fig. 4

1.Operation of switch

￿ Turning the switch on

Slide the switch lever on the main body backward as illustrated in Fig. 5. When you slide it backward completely, the switch gets turned on.

Switch on

Switch lever

Fig. 5

11