English
4. How to use stopper
(1)Install the stopper (Fig. 7)
1 Loosen the side handle and insert the straight portion of the stopper into the handle bolt hole from the front cover.
2Loosen the side handle, move the stopper to the specified position and rotate the grip of the side handle clockwise to fix the stopper.
5.How to use the drill bit (taper shank) and the taper shank adaptor.
(1)Install drill bit with taper shank in the taper shank adaptor.
(2)Turn the power on and drill a base hole.
(3)After cleaning out dust with a syringe, attach the plug to the anchor tip and drive in the anchor with a manual hammer.
(4)To remove the drill bit with taper shank, insert a cotter into the slot of the taper shank adaptor, place supports under the rotary hammer and tap the cotter with a manual hammer. (Fig. 9)
Stopper
Side Handle
Fig. 7
Taper Shank Adaptor
Drill Bit (Taper shank)
Fig. 8
Taper Shank
Adaptor
Cotter
Support
Fig. 9
16
