(1)Switching to “hammering”
(a)Pull the selector lever, release lock and turn it counterclockwise.
(b)Align ▲ of the selector lever with ▲
on the 
side of the undercover as illustrated in Fig. 7.
(c)Push in the selector lever to lock it.
NOTE:
Turn the selector lever (do not pull it up) to check if it is completely locked and make sure that it does not turn.
(2)When fixing working positions of tools such as cold chisel, etc.,
(a)Pull the selector lever, release lock and turn it. Align ▲ of the selector lever and of the undercover as illustrated in Fig. 8.
(b)Push in the selector lever to lock it.
(c)Turn the grip as illustrated in Fig. 9 and fix the working position of the
tool.
(d) Switch the selector lever to
“hammring” according to the procedures mentioned in the above item (1) and secure the position of the tool.
5.Install the stopper (Fig. 10)
(1)Loosen the side handle and insert the straight portion of the stopper into the handle bolt hole from the front cover.
(2)Loosen the side handle, move the stopper to the specified position and rotate the grip of the side handle clockwise to fix the stopper.
English
Undercover
▲
▲
Selector Lever
Fig. 7
▲
Undercover
Selector Lever
Fig. 8
Grip
Fig. 9
Stopper
Side Handle
Fig. 10
13
