Hitachi DH 50MB instruction manual Standard Accessories

English

ACCESSORIES

WARNING: Accessories for this power tool are mentioned in this Instruction Manual.

The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

NOTE:

Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES
(1)	Case (Molded plastic) (Code No. 318646)	1
(2)	Side Handle (Code No. 318574)	1
(3)	Stopper (Code No. 971786)	1
(4)	Allen Wrench 4 mm (Code No. 944458)	1
(5)	Allen Wrench 5 mm (Code No. 944459)	1
(6)	Allen Wrench 6 mm (Code No. 872442)	1
(7)	Hammer Grease A (Code No. 981840)	1
OPTIONAL ACCESSORIES.....sold separately
For accessories in detail please call HITACHI AT 1-800-59-TOOLS
1.	Through-hole drilling (Rotation + Hammering)

	+
(1) Drill bit (SDS-max shank)
External dia.	Overall lenght	Code No.
5/8" (16 mm)	13-3/8" (340 mm)	313448
	21-1/4" (540 mm)	313456
3/4" (19 mm)	13-3/8" (340 mm)	313449
	21-1/4" (540 mm)	313457
7/8" (22 mm)	12-5/8" (320 mm)	313450
	20-15/32" (520 mm)	313458
1" (25 mm)	12-5/8" (320 mm)	313451
	20-15/32" (520 mm)	313459
1-1/8" (28 mm)	14-9/16" (370 mm)	313452
	22-7/16" (570 mm)	313460
1-1/4" (32 mm)	14-9/16" (370 mm)	313453
	22-7/16" (570 mm)	313461
1-1/2" (38 mm)	14-9/16" (370 mm)	313454
	22-7/16" (570 mm)	313462
1-9/16" (40 mm)	14-9/16" (370 mm)	313455
	22-7/16" (570 mm)	313463

20