12.CHECK DAMAGED PARTS AND AIR LEAK.
Before further use of this compressor, guard or other parts should be carefully checked to see that it will operate properly and perform its intended function. Check alignment of moving parts, binding of moving parts, breakage of parts, mounting, air leak, and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced by an authorized service center.
Have defective pilot valve replaced by authorized service center.
Do not use this compressor if engine switch does not turn it on and off.
13.NEVER USE THIS COMPRESSOR FOR APPLICATIONS OTHER THAN THOSE SPECIFIED.
Never use this compressor for applications other than those specified in the Instruction Manual.
Never use compressed air for breathing or respiration.
14.HANDLE THIS COMPRESSOR CORRECTLY.
Operate this compressor according to the instructions provided herein. Never allow this compressor to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.
15.KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY IN PLACE.
Keep all screws, bolts, and covers tightly mounted. Check their conditions periodically.
16.NEVER USE A COMPRESSOR WHICH IS DEFECTIVE OR OPERATING ABNORMALLY.
If this compressor appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center.
17.DO NOT WIPE PLASTIC PARTS WITH SOLVENT.
Solvents such as gasoline, thinner, benzine, carbon tetrachloride, and alcohol may damage and crack plastic parts. Do not wipe plastic parts on this compressor with such solvents. Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry thoroughly.
18.USE ONLY GENUINE HITACHI REPLACEMENT PARTS.
Replacement parts not manufactured by Hitachi may void your warranty and can lead to malfunction, causing injuries. Genuine Hitachi parts are available from your dealer.
English
19.DO NOT MODIFY THIS COMPRESSOR.
Do not modify this compressor.
Do not operate at pressure or speed in excess of manufacturer’s recommendations.
Always contact the Hitachi authorized service center for any repairs. Unauthorized modification may impair this compressor's performance and result in accident or bodly injury.
20.TURN OFF THE ENGINE SWITCH WHEN THIS COMPRESSOR IS NOT USED.
When this compressor is not used, push the knob of the engine switch OFF and open the drain cock to discharge the compressed air from the air tank.
21.NEVER TOUCH HOT SURFACE.
To reduce the risk of burns, never allow any part of your body or other materials to contact with any exposed metal parts on this compressor.
Never allow any part of your body to contact the engine muffler or adjacent areas.
These areas can remain hot for at least 45 minutes after this compressor is shutdown. Cool down before servicing.
22.DO NOT DIRECT AIR STREAM AT BODY.
Do not direct air stream at persons or animals, to avoid any bodily injury.
23.DRAIN TANK.
Discharge the drain after each use and every day. When the tank gets corroded, there can be a risk of breakdown. Accordingly, be sure to discharge the drain inside the tank after each use. The drain contains moisture in the air, abrasion particles, rust, etc. To discharge the drain, therefore, gradually open the drain cock, and be careful not to point it at your face or eyes.
24.USE ONLY RECOMMENDED AIR HANDLING PARTS ACCEPTABLE FOR PRESSURE NOT LESS THAN 125 PSI (8.6 BAR)
Risk of bursting. Use only recommended air handling parts acceptable for pressures not less than 125 psi (8.6 bar).
25.SEE TO IT THAT FUEL IS SUPPLIED APPROPRIATELY.
Follow all fueling instructions in operator’s manual. Do not smoke while fueling.
Do not fill fuel tank while this compressor is running or hot. Allow this compressor and engine to cool down for two minutes before refueling.
Do not refuel indoors or in a poorly ventilated area. Do not fill fuel tank to point of overflowing.
Always refuel slowly to avoid the possibility of spilled fuel which may cause a fire.
Do not operate this compressor if gasoline is spilled. Wipe this compressor clean and move it away from the spill. Avoid creating any ignition until the gasoline has evaporated. Allow approximately 1/4" of tank space for fuel expansion.
- 5 -