English

SPECIFICATIONS

Compressor Model

 

 

EC25E

Engine

Manufacturer And Model

Honda GX160

 

 

 

 

Displacement

9.9 cu in (163 mL)

 

 

 

 

 

Max. Output

5.4bhp (4.0kW, 5.5PS)/3600min-1

 

Fuel Tank Capacity

0.95 US gal. (3.6 L)

 

 

 

 

Tank Capacity

 

 

8.0 gal. (30.3L)

 

 

 

 

Maximum Pressure

 

 

125 PSI (8.6 bar)

 

 

 

 

Free Air Delivery

at 40 PSI

10.6 CFM (300 L/min)

 

(2.8 bar)

 

 

 

 

 

 

 

at 90 PSI

9.6 CFM (272 L/min)

 

(6.2 bar)

 

 

 

at 100 PSI

9.0 CFM (255 L/min)

 

(6.9 bar)

 

 

 

 

 

 

 

 

 

 

APPLICATIONS

{Air source of the pneumatic nailer and stapler.

PRIOR TO OPERATION

1.Initial set-up

A)Read safety warnings before setting-up this compressor.

B)Ensure the oil level in this compressor pump is adequate. If the oil level is low, replenish oil through the filling hole so that the amount of oil will come to a point between the maximum notch and the minimum notch on the dipstick according to the following OIL TYPE CHART. (Fig. 2)

OIL TYPE CHART

Ambient

14~32

32~68

68~104

temperature

(°F)

(°F)

(°F)

(°F)

 

 

 

 

 

 

 

Non-detergent

SAE 10W

SAE 20W

SAE 30

oil

 

 

 

 

 

 

 

2.Location

A)In order to avoid damaging this compressor, do not incline this compressor transversely or longitudinally more than 10°.

B)Place this compressor at least 12 inches away from obstacles that may prevent proper ventilation. Do not place this compressor in an area:

-where there is evidence of oil or gas leaks.

-where flammable gas vapors or materials may be present.

-where air temperatures fall below 14°F or exceed 104°F.

-where extremely dirty air or water could be drawn into this compressor.

3.Gasoline engine

A)Review page 5.25 before fueling.

WARNING Do not allow the engine or muffler to come in contact with flammable vapors, combustible dust, gases or other combustible materials. A spark may cause a fire.

Do not place this compressor in an area where flammable gas vapors may be present. A spark can cause an explosion or fire.

B)Read the engine manual accompanying this compressor for correct engine start-up maintenance procedures.

C)Read and understand the safety labels located on this compressor.

D)A minimum of 85 octane fuel is recommended for use with this compressor. Do not mix oil with gasoline.

E)Use of clean, fresh, lead free gasoline should be used. Do not use gasoline containing methanol or alcohol.

F)Check the engine oil level before starting. (See engine manual.)

G)Fill the fuel tank according to the engine manual instruction.

- 8 -