Hitachi EH-150 Accessories, System Configuration, EH-IOC, EH-CB10, EH-DUM, LIBAT-H, EH-PROG20, EH-HEH30, to an HMI of Hitachi's EH-HMIseries (lenght 3m), EH-32XY04, EH-CUCN40

Engineering Guideline

EH-150 Series PLC

	Type
	EH-IOC	I/O controller module for mounting on the CPU-Slot of the expansion rack.

	Connecting cable between base rack and I/O controller
	Type
	EH-CB10	Cable to connect the I/O controller EH-IOC with the connector on the right
	EH-CB10	side of the base rack.
		side of the base rack.
	Dummy module
	Type
	EH-DUM	Dummy module to cover not used slots on base and expansion rack.
	Battery
	Type
	LIBAT-H	Battery for the CPU to keep the contents of the retentive area and the RTC
	LIBAT-H	running while the power is switched of.
		running while the power is switched of.
	Cables
	Type
	EH-PROG20	Programming cable to connect the serial communication ports of the CPU'
	EH-PROG20	to a 9-pole Sub-D serial interface of a PC (lenght 2m).
		to a 9-pole Sub-D serial interface of a PC (lenght 2m).
	EH-HEH30	Communication cable between the serial communication ports of the CPU'
	EH-HEH30	to an HMI of Hitachi's EH-HMI series (lenght 3m).
		to an HMI of Hitachi's EH-HMI series (lenght 3m).
	EH-32XY04	Ready-to-use connecting cable for the 32- and 64-point I/O modules with
	EH-32XY04	dedicated plug on one end, open on the other end (lenght 4m).

	EH-CUCN40	Ready-to-use connecting cable for the Counter-modules with dedicated
	EH-CUCN40	plug on one end, open on the other end (lenght 4m).
		plug on one end, open on the other end (lenght 4m).