![](/images/new-backgrounds/1059968/5996817x1.webp)
Installation
Changing the Orientation of the Fluid Inlet
and Outlet Ports
The pump is shipped with the ports facing the same direction. To reverse the orientation of the ports:
1.Remove the clamps holding the inlet and/or outlet manifold to the covers.
2.Reverse the manifold and reattach. Install and tighten clamps snugly.
Key:
N1/2 npt(f) air inlet port P Muffler (air exhaust
port is 3/4 npt(f) R Fluid inlet port S Fluid outlet port 113 Manifold clamps 3 Air valve screws
1 Torque to
N
P
1 3 | 113 | S | |
|
|
|
|
106
RTI8926a
FIG. 3
311879F | 9 |