Hitachi FD2 1590 important safety instructions Maximum fluid working pressure Psi 0.8 MPa, 8 bar

CAUTION:

Santoprene® may be used only with non-fatty,non-oily foods or alcohols up to 15%.

Non-wetted external parts . . . . . . . . . . . . . . . . . . . . . . . . 300 series stainless steel, polyester (labels), LDPE foam (gasket)

Weight

All models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 lb (40.3 kg) Santoprene® is a registered trademark of the Monsanto Co.

Loctite® is a registered trademark of the Loctite Corporation.

Technical Data - 1590

Technical Data - 1590

Maximum fluid working pressure	120 psi (0.8 MPa, 8 bar)
Air pressure operating range	20-120 psi (0.14-0.8 MPa, 1.4-8 bar)
Maximum air consumption	130 scfm
Air consumption at 70 psi/50 gpm	42 scfm (see chart)
Maximum free-flow delivery	100 gpm (379 l/min)
Maximum pump speed	200 cpm
* Gallons (Liters) per cycle	0.5 (1.9)
Maximum suction lift	29 ft (8.83 m) wet, 14 ft (4.26 m) dry
Maximum size pumpable solids	3/16 in. (4.8 mm)
** Maximum Noise Level at 100 psi, full flow	88 dBa
** Sound Power Level	95 dBa
** Noise Level at 70 psi and 50 cpm	79 dBa
	PTFE 220°F (104.4°C)
Maximum fluid operating temperature is based on the fol- Santoprene® 180°F (82.2°C)
lowing maximum diaphragm, ball, and seat temperature	Neoprene 200°F (93°C)
ratings	EPDM 275°F (135°C)
	Stainless steel 250°F (121.1°C)
Air inlet size	0.5 in. npt(f)
Fluid inlet size	2.0 in. Sanitary flange
Fluid outlet size	2.0 in. Sanitary flange

Wetted parts

***All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.

Wetted materials on all models . . . . . . . . . . . . . . . . . . . . 316 SST

Wetted material depending on model. . . . . . . . . . . . . . . . EPDM, Neoprene, PTFE, Santoprene®

*Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type.

**Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614-1.

***The pump user must verify that the construction materials meet their specific application requirements.

40 311879F