13.DISCONNECT POWER TOOLS. When not in use, before servicing, and when changing accessories, such as blades, bits, cutters.
14.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from the power tool before turning it on.
15.AVOID UNINTENTIONAL STARTING. Don’t carry a
16.OUTDOOR USE EXTENSION CORDS. When the power tool is used outdoors, use only extension cords intended for use outdoors and so marked.
17.STAY ALERT. Watch what you are doing. Use common sense. Do not operate the power tool when you are tired.
18.CHECK DAMAGED PARTS. Before use of the power tool, a guard or other part should be carefully checked to determine that it will operate properly and perform its intended function. Check the alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by an authorized service center. Do not use the power tool if switch does not turn it on and off.
19.AVOID USING A POWER TOOL FOR APPLICATIONS OTHER THAN THOSE SPECIFIED. Never use the power tool for applications other than those specified in this instruction manual.
20.ENSURE SAFE OPERATION THROUGH CORRECT HANDLING. Secure safe operation through correct handling by observing the instructions described herein.
Do not employ accessories other than those specified herein; otherwise, a hazardous condition may be created.
Never allow the power tool to be used by persons not familiar with correct handling (such as chidren) or by those who are not familiar with the power tool.
21.CONFIRM THAT NO ITEMS SUCH AS AN ELECTRIC CABLE OR CONDUIT ARE BURIED INSIDE. In places where electric wiring may be hidden behind a wall, floor, ceiling, etc. do not hold or contact any metal parts of the poweer tool. In such cases, metal parts could become electrically live and present a serious shock hazard.
22.KEEP THE RIGHT PARTS IN THE RIGHT POSITIONS. Do not remove covers and screws which have been
23.SHOULD THE PLASTIC HOUSING OR HANDLE OF THE POWER TOOL BE CRACKED OR DEFORMED, DO NOT USE IT. Since cracked or deformed parts may lead to an operator receiving an electric shock, do not use such a power tool. Immediately have it repaired.
24.SECURELY MOUNT ACCESSORIES AND BLADES TO THE POWER TOOL MAIN BODY. Extra care must be taken when using the power tool on elevated location (such as a roof ladder, scaffold, or the like) to prevent injury to someone underneath in the event the power tool and/or accessory should drop.
25.ALWAYS KEEP THE MOTOR AIR VENT FULLY OPENED. A constantly open motor air vent is necessary to allow air to come in and out for cooling the motor. Do not allow it to become clogged up, even if dust is blown through it.
26.OPERATE THE POWER TOOL AT THE RATED VOLTAGE. Operate the power tool at voltages specified on its nameplate.
27.NEVER TOUCH THE MOVING PARTS. Never touch the moving parts such as blades, bits, cutters and others.
2
