![4. OPERATING CONDITION](/images/new-backgrounds/153421/1534213x1.webp)
4. OPERATING CONDITION
(1)Input signal level: | VS |
(2)Power input voltage: | 11 to 17V DC |
(3)Ambient temperature |
|
(a)Full specifications: | 0 to 40 ℃ |
(b)Operating: | |
(c) Storage: |
5. EACH DESCRIPTION
|
| ①R Tally lamp | |
① | ① | ②G Tally lamp | |
③Front tally switch | |||
② | ② | (FRONT TALLLY OFF/ON) | |
④Aperture control (APT) | |||
| |||
|
| ⑤Brightness control (BRIGHT) | |
|
| ⑥Contrast control (CONTRAST) |
③ | ④ ⑤ ⑥ |
IMPORTANT NOTICE
For U.S.A.
These products have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. These products generates, use, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, they may cause harmful interference to radio communications. Operation of these product in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by Hitachi Kokusai Electric responsible for compliance could void the user’s authority to operate the equipment.
For Canada
These products do not exceed the class A limits for radio noise emissions from digital apparatus as set out in the radio interference regulations.
Le présent appareil n’émet pas de bruits radioélectriques dépassant les limités applicable aux appareils numériques de classe A prescrites dans le réglement sur le brouillage radioélectrique édicter par le ministére des communications du canada.
③ | ④ |