PC Mode
Installation
•Power off both Computer and Display before making any connections.
•Set your PC’s resolution correctly before connect- ing to the TV. See the table on Appendix A on page 36.
•Use
Menu System in PC mode
Sound Menu/Feature Menu
The items in these menus are described at Sound & Feature Menu explained in “Menu System”.
PC Picture Menu
By pressing α /βbutton, select the second icon. PC Picture menu appears on the screen.
Brightness, Contrast and Colour Temperature adjust- ments in this menu are identical to adjustments de- fined in TV picture menu in “MENU SYSTEM”.
PC POSITION Menu
By pressing α /β button, select the sixth icon. PC POSITION menu appears on the screen.
3&326,7,21 |
Autoposition
If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically.
•Select Autoposition item by using α / β buttons. Press or OK button.
Warning: Auto position adjustment recommended to be done with the full screen image for the proper adjustment.
H (Horizontal) Position
This item shifts the image horizontally to right hand side or left hand side of the screen.
•Select H Position item by using α / β button.
•Use _ / ‾ button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top or bottom of the screen.
•Select V Position item by using α / β button.
•Use _ / ‾ button to adjust the value.
Phase
Depending on the resolution and scan frequency that you input to the TV Set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.
•Use _ / ‾ button to adjust the value.
Dot Clock
Dot Clock adjustments correct interference that ap- pear as vertical banding in dot intensive presenta- tions like spreadsheets or paragraphs or text in smaller fonts.
•Use _ / ‾ button to adjust the value.
Sound in PC mode
•Connect the PC’s Audio output to the TV’s PC Audio In socket with an audio cable.
Downloaded From
