Hitachi L47S601 Power light indicator, Remote Control sensor, INPUT- Front Jacks

First time use

Side Panel Controls

￿ POWER light indicator

To turn the TV ON, press the power button	￿ R/C sensor
located on the right side of the TV set.

Ared stand-by indicator lamp located on the lower right corner of the front bezel is illuminated. The LCD TV is now ready for

remote ON/OFF operation.

￿ Indicating Lamp

Indicating Lamp	Power Status	Operating
Off	OFF.	When the TV set is unplugged from AC line.
Lights	OFF.	When the TV set is plugged to the AC line.
Red	(Stand-by)
Lights	On	TV POWER is ON ; picture is shown.
Blue
Lights	Off	TV POWER is ON with no signal input
Orange	(Power Saving)	except antenna (no sync. signal).
Blinking	On	When TV receives the IR signal from R/C.
Blue

￿REMOTE CONTROL sensor

Point your remote at this area when selecting channels, adjusting volume, etc.

￿INPUT- FRONT JACKS

INPUT- FRONT provide composite Video jacks for connecting equipment with this capability, such as a DVD player or Camcorders.

NOTES: 1. Your HITACHI LCD TV will appear to be turned OFF (lights orange) if there is no video input when INPUT : 1, 2, 3, Front and HDMI 1, 2 , Front. Check the Power Light to make sure the TV is turned off or in Stand-by mode (lights red) when not in use.

2. Remote Control can not turn ON/OFF the “MAIN POWER” of the TV.

12