Connections to other equipment

(continued)

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cables are required.

Rear of the unit

To HDMI out HDMI device

or

To PC/DVI AUDIO IN

To HDMI IN

HDMI cable (type A connector)

(not supplied)

HDMI - to - DVI adapter cable

(HDMI type A connector)

(not supplied) Audio cable (not supplied)

DVI device

To DVI output

NOTE:

• When using HDMI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 15). Otherwise you will only see the image with no sound.

• If you connect an external component (cable box, satellite receiver, etc.) to this TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

 

Front

Subwoofer

Speaker

(Right)

 

Front

TV

 

 

 

 

 

Speaker

 

 

 

(Left)

 

 

Digital Audio

 

 

 

Coaxial Output

 

 

 

Coaxial digital cable

 

 

 

(not supplied)

 

 

 

To Coaxial

 

 

Center Speaker

Digital Audio Input

 

 

 

 

 

Surround

Surround

AV Amplifier with built-in digital surround

 

Speaker (Left)

Speaker

 

 

(Right)

decoder as listed above

 

 

 

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

22

3AQ0201A_eng.indd 22

5/4/10 3:28:15 PM

Page 22
Image 22
Hitachi LE19S304 To connect a Hdmi or a DVI device to the unit, Using an AV Amplifier with built-in digital surround