Uniden D3280 Important Information, Using the System While Youre Away from Home, Solving Problems

Using the System While You're Away from Home

You can dial in to your answering system from any touch-tone phone. Before you can use this feature, you must program a security code.

Programming a Security Code

With the phone in standby, open the menu; select Ans. Setup, then select Security Code. Use the number keypad to enter a two-digit security code (01 to 99). Press Menu/select when you’re finished.

Remember to make a note of your new security code!

Dialing In to Your System

1. Call your phone number & wait until the system answers. (If the system is turned off, it answers after 10 rings & sounds a series of beeps.)

2. During the greeting or beeps, press 0 and immediately enter your security code. If you enter it incorrectly 3 times, the system hangs up and returns to standby.

3. The system announces the time, the number of messages in memory, and a help prompt. It beeps to let you know it's waiting for a command.

4. When you hear beeping, enter a 2-digit command from the chart.

If you don't press

any keys for 15	01	Repeat message	05	Stop playback
seconds, the	02	Play message	06	Turn the system on
system hangs
	03	Skip message	09	Turn the system off
up and return to
	04	Delete message	10	Hear help prompts
standby.

Important Information

Solving Problems

If you have any trouble with your phone, check this section first. If you need help, call our Customer Care Line listed on the front cover.

General problems	Possible solutions
No handsets can make or		Check the telephone cord connection.
		Disconnect the base AC adapter for a few minutes; then
receive calls.
		reconnect it.
A handset can’t make or		Move the handset closer to the base.
receive calls.
A handset can make calls,		Make sure the ringer is turned on.
but it won’t ring.		Make sure Silent Mode is turned off (see p. 15).
A handset is not working.		Charge the battery for 15-20 hours.
		Check the battery connection.

English - 21