2.If you still have the base the handset is registered to, select Deregister HS, then select the handset you want to reset. If you don’t have that base anymore, select Base Unavailable.

3.To confirm, select Yes. The handset displays Handset not registered.

Registering Handsets

If you see a “not registered” message on a handset, you must register it to a base before using it.

1. Place the handset in the base; the display should say Handset Registering.

2. Wait until the display says Registration Complete (about 30 seconds), then pick up the handset; press home/flash.

If you don’t hear a dial tone or the display says Registration Failed, charge the battery completely, then try again.

Adapter and Battery Information

AC adapter

Base

 

Charger

Part number

PS-0034

 

PS-0035

Input voltage

120V AC, 60 Hz

 

Output voltage

7.8V AC @

 

8V AC @

450mA

 

300mA

 

 

Use only the supplied AC adapters.

Use the proper adapter for the base & any chargers.

Do not place the unit in direct sunlight or subject it to high temperatures.

Battery pack (with normal use)

Part number

BT-1022

Capacity

300mAh, 2.4V DC

Talk time

about 7 hours

Standby time

about 7 days

Battery life

about 1 year

Replace the battery when the talk or standby time becomes noticeably reduced. For replacements, call the Parts Department (see the front cover).

When the battery gets low, the handset beeps and shows a low battery alert; put the handset in the cradle for recharging.

Rechargeable Battery Warning

This equipment contains a rechargeable Nickel- Metal-Hydride (Ni-MH) battery.

Nickel is a chemical known to the state of Califor- nia to cause cancer.

Do not short-circuit the battery.

The batteries in this equipment may explode if disposed of in a fire.

Do not charge the batteries in any charger other than the one specified in the owner's manual. Using another charger may damage the battery or cause it to explode.

As part of our commitment to protecting our environment and conserving

natural resources, Uniden voluntarily participates in

an RBRC® industry program to collect and recycle used

Ni-MH batteries within the United States. Please call

1-800-8-BATTERY for information on Ni-MH

battery recycling in your area. (RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.)

Rechargeable batteries must be recycled or disposed of properly.

Warning! The cords on this product and/or accessories contain lead, a chemical known to the state of California to cause birth defects or other reproductive harm. Wash hands after handling.

Uniden works to reduce lead content in our products & accessories.

Compliance Information

FCC Part 68 Information

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the phone company.

An applicable Universal Service Order Codes (USOC) certification for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the

24 - English

Page 24
Image 24
Uniden D3280 manual Registering Handsets, Adapter and Battery Information, Rechargeable Battery Warning