Maintenance and Inspection

English

MAINTENANCE

NOTE:

The information contained in this Manual is designed to assist you in the safe maintenance of the Stapler.

Some illustrations in this Manual may show details or attachments that differ from those on your own Stapler.

Read section titled “SAFETY” (pages 4 – 6).

WARNING

⬤Disconnect air hose and remove all staples from Stapler when:

1)doing maintenance and inspection; and

2)clearing a jam.

1.Clearing a jam

Remove a jammed staple in the following order:

1DISCONNECT AIR HOSE.

2 Remove all staples.

3 Release the lock lever and open the blade guide.

4 Remove the jammed staple with a slotted-head screwdriver.

5 Close the blade guide and latch.

6 In case of frequent jam, contact a Hitachi authorized service center.

	Lock
3	Lever
3
	1
Blade Guide	Disconnect
Blade Guide	air hose

2.Maintenance chart (See page 15)

3.Operator troubleshooting (See page 15)

4.Storing

◯When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.

◯Do not store the Stapler in a cold weather environment.

Keep the Stapler in a warm area.

◯When not in use, the Stapler should be stored in a warm and dry place.

Keep out of reach of children.

5. WARNING LABEL

Change the WARNING LABEL if missing or damaged. A new WARNING LABEL is available from a Hitachi authorized service center.

Warning Label

SERVICE AND REPAIRS

WARNING

⬤Only service personnel trained by Hitachi, distributor or employer shall repair the Stapler.

⬤Use only parts supplied or recommended by Hitachi for repair.

All quality Staplers will eventually require servicing or replacement of parts because of wear from normal use.

4NOTE:

Specifications are subject to change without any obligation on the part of HITACHI.

— 14 —

N 5008AC specifications

The Hitachi N 5008AC is an advanced horizontal machining center specifically designed to meet the demands of precision milling and heavy-duty machining operations. This cutting-edge machine reflects Hitachi's commitment to innovation and quality in manufacturing, catering to a wide range of industries including automotive, aerospace, mold and die, and general machining.

One of the key features of the N 5008AC is its robust construction. The machine incorporates a solid, reinforced casting design to minimize vibration, ensuring high stability during complex machining tasks. This structural integrity contributes to improved accuracy and surface finish, making it ideal for intricate components that require tight tolerances.

The N 5008AC is powered by a high-performance spindle that reaches speeds of up to 12,000 RPM. This spindle is equipped with an advanced cooling system which aids in maintaining thermal stability, thereby enhancing performance during prolonged machining operations. Coupled with a powerful servo motor, it provides higher torque at low speeds, making it suitable for both high-speed and heavy-duty applications.

Another notable aspect of the N 5008AC is its intelligent control system that leverages cutting-edge CNC technology. The system features advanced programming capabilities, enabling users to achieve complex multi-axis machining operations with ease. Its user-friendly interface simplifies the setup process, allowing operators to efficiently switch between different tasks and optimize machining time.

The machine also comes with a generous tool magazine that can accommodate a wide range of tooling options, promoting flexibility and efficiency. With an automatic tool changer, the N 5008AC minimizes downtime during tool swaps, maximizing productivity. Additionally, with a large work envelope, this machining center is adept at handling sizable workpieces.

In terms of technologies, the N 5008AC utilizes adaptive control features that adjust machining parameters in real-time based on cutting conditions. This smart technology not only enhances machining accuracy but also extends tool life by ensuring optimal cutting conditions throughout the machining process.

Moreover, the N 5008AC emphasizes energy efficiency, incorporating systems that reduce power consumption while maintaining peak performance. This commitment to sustainability aligns with global trends towards environmentally responsible manufacturing practices.

In summary, the Hitachi N 5008AC stands out as a versatile and powerful machining center that combines exceptional stability, advanced CNC technology, and a host of intelligent features, making it a top choice for manufacturers aiming to enhance productivity and precision.

Hitachi N 5008AC manual Maintenance and Inspection, Service and Repairs

Models: N 5008AC

MAINTENANCE