English

LOADING NAILS

WARNING

When loading nails into Nailer,

1)do not depress trigger;

2)do not depress push lever; and

3)keep Nailer pointed downward.

(1)Pull the nail feeder back until it latches.

Nail Feeder

(2)Insert nail strips one by one from above the magazine. Two strips can be loaded at one time.

Nail Strip

Magazine

(3)Press the stop lever and slide the nail feeder forward until it contacts the nail strip.

NOTE:

Quietly push the Nail Feeder against the nail.

If the Nail Feeder is released from backward the magazine and bumped against the nail, the connecting plastic of the nail can be damaged.

Use nail strip at least 5 nails remaining.

Set heads of nails overlapped as shown in the below figure.

Ensure that the head of tail nail is set under the nail stopper of nail feeder.

Tail Nail

Nail Stopper

The Nailer is now ready to operate.

NAILER OPERATION

Stop Lever

Read section titled “SAFETY”(pages 4 – 6).

Nail Feeder

DANGER

Operators and others in work area MUST wear safety glasses with side shields which conforms to ANSI Z87.1 specifications.

— 12 —

Page 12
Image 12
Hitachi NR83A2(S1), NR83A2(Y) manual Loading Nails, Nailer Operation