English
WORKING ENVIRONMENT
WARNING
PREPARING THE FUEL CELL
Read section titled “SAFTY, IMPORTANT SAFETY INSTRUCTIONS FOR FUEL CELL” (page 9).
120°F MAX (50°C)
No flammable gas, liquid or other flammable objects at worksite.
Use outside or
Do not inhale.
Keep the Nailer, fuel cell and battery away from sunshine and from temperature exceeding 120°F (50°C).
Keep away from ignition sources. No smoking.
Clear the area of
children or u n a u t h o r i z e d personnel.
DANGER
The fuel cell is flammable.
Keep away from ignition sources.
Do not spray to a naked flame or any incandescent material.
Do not smoke when handling fuel cell.
Keep stem of fuel cell away from face or skin. Expanding gases
cause low temperatures. Do not contact with gases.
Do not inhale.
COLD WEATHER CARE
Do not store the Nailer, fuel cell and battery in a cold weather environment. Keep the Nailer, fuel cell and battery in a warm area until beginning the work.
If the Nailer, fuel cell and battery are already cold, bring it in a warm area and allow the Nailer to warm up before use. Observe temperature limit of max. 120°F (50°C).
Do not expose to an open flame and sparks!
CAUTION
This Nailer may not drive completely below when; at low temperature fuel cell loose the required propellant force, at high temperature fuel cell overdose.
Do not use the Nailer in the rain or where excessive moisture is present.
This Nailer is not recommended for use at altitudes above 5,000 feet (1,500 m), or in temperature below 30°F (0°C).
Keep out of reach of children.
CAUTION
If the gas leaks from the metering valve or the gas cartridge after attached the metering valve, replace with the new metering valve.
Do not attempt to reuse the metering valve.
Replace with the new metering valve.
To attach the metering valve to a fuel cell:
(1)Separate the metering valve and the cap from the gas cartridge.
21