English
(3)Push the nail feeder (A) to engage the nail feeder (B) to the nail strip.
Nail feeder (B)
Nail feeder (A)
NOTE:
Quietly push the nail feeder (A) and nail feeder (B) against the nail.
If the nail feeder (A) and nail feeder (B) are released from backward the magazine and bumped against the nail, the connecting adhesive of the nail can be damaged.
Use nail strip of more than 10 nails.
Use an unbroken nail strip with nails of all the same length.
The Nailer is now ready to operate.
Removing the nails:
1Pull the nail feeder (B) backward.
2Return the nail feeder (B) forward quietly
while pushing the nail feeder (A).
3Pull out nails from the back of the magazine.
1
3
Nails
<NT50GS>
(1)Lightly press the stop lever and gently pull out the magazine cover.
Press
Pull out
Magazine cover Stop lever
(2)Set nail strip into the magazine and keep the points of nails in contact with Groove.
Nail strip 
Magazine Groove
NOTE:
2 
Nail feeder (B)
Nail feeder (A)
The nails shown in page 17 can be loaded onto the side guide groove of the magazine without any adjustment.
Always keep the points of nails in contact with Groove.
25