First time use
Connecting External Video Sources
Your HITACHI Plasma Television is equipped with an AV Net feature. This feature helps to control your external Audio/Video equipment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Blaster cable to control your equipment using your HITACHI Plasma TV Remote Control. You can use your HITACHI remote control to control the Audio/Video equipment command without the equipment’s remote
control.
The Plasma Television Rear Panel has 2 IR Out jacks. Each IR Blaster cable can connect up to 2
external Audio/Video components. Therefore, you can connect the Plasma Television with up to four components. Please see the following example of an AV Net setup between your Hitachi Plasma Television and external Audio/Video equipment (VCR and DVD Player).
CONNECTING EXTERNAL AUDIO/VIDEO COMPONENTS TO IR OUT FOR AV NET
1.Connect your external Audio/Video components to the Rear Panel shown below.
2.Connect the IR Blaster cable to the IR OUT terminal of the Rear Panel.
3.Place the IR Blaster in front of the infrared sensor of the external components you wish to control.
|
|
| OUTPUT |
|
| Y | PB/CB PR/CR R L |
V | L | R |
|
| OUTPUT |
| |
Infrared |
| Infrared |
|
| Sensor |
| |
Sensor |
|
| |
|
| DVD | |
VCR |
|
| |
|
|
| |
IR |
|
|
|
Blaster |
|
|
|
4.ACCESS THE AV NET SETUP WIZARD Press the MENU button.
5.Use the CURSOR PAD to highlight SETUP.
6.Press the SELECT or CURSOR PAD button to select.
7.Use the CURSOR PAD to highlight the
SET | AV NET feature then press the |
button. |
|
8.Follow the Setup procedure on pages 67-74.
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Power Swivel
Move SEL Select
Setup
Set the Menu Options
Set The Screen Saver
Set The Inputs
Set The AV NET
Set The Closed Captions
Set The IR Out
Select The Quick Start Option
Reset the Software
Move SEL Return
NOTE: 1. The Rear Panel has two IR OUT terminals which can control up to a total of four external components.
2.The IR Blaster must be placed in front of the external components infrared sensor for the AV Net to work.
3.The correct codes must be chosen for each of the Audio/Video components for the AV Net to function properly.
24
