Setup
5.Use the CURSOR PAD or to select “Other” from brand name choices.
6.Use the CURSOR PAD or to highlight “Learning Mode” then press the SELECT button.
AV Net Setup Wizard : A/V Receiver Setup
Please choose the Brand Name of your A/V Receiver. If you can not find the Brand Name, please choose “Other” and proceed to the Learning mode by pushing the Learning Mode Button.
Brand Name | Other |
Learning Mode
BackNext
Move | Change Brand Name |
7.Use the CURSOR PAD , , and to select the Soft Key to learn (Ex. VOL ), then press the SELECT button.
AV Net Setup Wizard : Custom Settings
Select the A/V Receiver softkey to learn?
TV Softkeys
POWER | CH | VOL |
|
|
|
MUTE | CH | VOL | AUDIO |
|
|
SOURCE 1 | SOURCE 2 | SOURCE 3 | SOURCE 4 | SOURCE 5 | |
SOURCE 6 | SOURCE 7 | SOURCE 8 | SOURCE 9 | SOURCE 10 | |
|
|
| Back | Done | |
|
|
|
|
|
|
Move | SEL Select |
|
|
|
|
|
|
|
|
|
|
8.Press and hold the VOL button of your A/V Receiver remote control while pointing directly at the learning AV NET sensor of the Plasma TV (located at the lower right corner of the screen) at a distance of 3.2 feet or 1 meter maximum.
AV Net Setup Wizard : A/V Receiver Setup
Press and hold desired button to transfer the command to AV NET.
VOL
Please wait while AV NET
Learns the command....
Move SEL Select
9.If the IR code transfer was not completed, the screen below appears. Repeat step 8 to try again.
AV Net Setup Wizard : A/V Receiver Setup |
| ||
|
| VOL |
|
|
| Transfer not completed! |
|
|
| Try again? |
|
|
| Cancel | OK |
Move | SEL | Select |
|
10.If the IR code transfer was successful, the screen below appears, then select “OK” to continue setup.
AV Net Setup Wizard : A/V Receiver Setup
VOL
Transfer was successful.
Press OK to store and continue.
CancelOK
Move SEL Select
11.Select another Soft Key to learn or select DONE to move on to the next screen.
12.Select the Test button VOL to check the response of the device to this command. Test Buttons will show you first learned keys with a maximum of 3.
13.Use the CURSOR PAD , , and to highlight NEXT, then press the SELECT button to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Select the Test button. If device responds to this command, proceed to “Next”. Otherwise, try another IR Code Set number.
Brand Name | Other |
IR Code Set | Other |
| Learning Mode |
Test Button | VOL |
BackNext
Move SEL IR Out
14.Use the CURSOR PAD or to select the TV Input that connects to the video and audio output of the A/V Receiver.
15.Use the CURSOR PAD , , and to highlight NEXT, then press the SELECT button to move on to the next SETUP screen.
71
