NOTES: 1.

Setup

After the CableCARD has been successfully installed, you can access CableCARD Information menu in the SETUP menu of the On-Screen Display.

Follow the instructions below to access the CableCARD Information menu.

1.Press the MENU button on the Remote Control to access the Main Menu screen.

2.Use the CURSOR PAD ￿ to highlight SETUP in the Main Menu and press the SELECT button.

3. Use the CURSOR PAD ￿ to highlight CableCARD Information and press the SELECT button.

OR

4.To view the CableCARD ID and Host ID, use the CURSOR PAD ￿ to highlight CableCARD Info and press the SELECT button.

NOTE: The Diagnostics Info. window is for

Service use only.

THINGS TO CHECK WHEN USING THE

CableCARD / CableCARD Services

1.Check that the CableCARD is properly inserted in

the CableCARD slot.

OR

2. Remove the CableCARD by pulling the CableCARD straight out.

3.Visually inspect the CableCARD to ensure all pin- holes are in good condition, with none blocked or damaged.

4.Make sure the CableCARD is re-inserted in the correct direction, then slowly push until it is fully seated in the slot.

5.When the CableCARD is installed, note all screen messages that appear (“CableCARD Installed”, “Acquiring Data”, “CableCARD is not Installed”). If the “CableCARD Installed” message does not appear when card is installed, check the TV’s card slot and CableCARD pins for obstructions or damage.

6.If problems still remain, please contact your Cable Service Provider.

Video

Audio

TV Guide On Screen

Channel Manager

Locks

Timers

Setup

Power Swivel

Move SEL Select

Setup

Setup The Menu Options

Set The Screen Saver

Set The Inputs

Set The AV Net

Set The Closed Captions

Set The IR Out

CableCARD Information

Select The Quick Start Option

Reset The Software

Move SEL Select

Setup

CableCARD Information

Select the button below to acess

CableCARD ID and Host ID.

CableCARD Info.

Select the button below to access

CableCARD and Host Diagnostics.

Diagnostics Info.

Move

SEL Return

In order to start cable service for this device, please contact your cable provider

CableCARD(tm): 123-456-789-1

Host: 123-456-789-1

Data: 123-456-789-1

Unit Address: 123-456-789-1

Press EXIT to return

On-Screen Display

When a CableCARD is installed, Auto Channel scan will not be needed because the channel list is automatically loaded to the TV's channel memory.

2.The TV will take several minutes to detect and recognize the presence of the CableCARD. This process must be completed before any CableCARD information or Channel listings is accessed.

77

Page 77
Image 77
Hitachi P50V701 important safety instructions Things to Check When Using, CableCARD / CableCARD Services