10
Rear Panel JacksAntenna Input
To switch between Cable and Air input, go to the Channel
Manager option to change the signal source CABLE or
AIR (see page 41).
Component: Y-PBPR and Audio Inputs
INPUTS 1 and 2 provide Y-PBPR and Audio jacks for
connecting equipment with this capability, such as a
DVD player or Set Top Box. You may use COMPOSITE
video signal for both inputs.
Your component outputs may be labeled •
Y, B-Y, and R-Y. In this case, connect the
components B-Y output to the TV’s PB input
and the components R-Y output to the TV’s
PR input.
Your component outputs may be labeled •
Y-CBCR. In this case, connect the component
CB output to the TV’s PB input and the
component CR output to the TV’s PR input.
It may be necessary to adjust TINT to obtain •
optimum picture quality when using the
Y-PBPR inputs (see page 35).
INPUT 1 and 2 (Y/VIDEO) can be used for •
composite video and component video input.
HDMI 1, 2 (High Denition Multimedia Interface)
ABOUT HDMI – HDMI is the
next-generation all digital
interface for consumer
electronics. HDMI enables the secure distribution of
uncompressed high-denition video and multichannel
audio in a single cable. Because digital television (DTV)
signals remain in digital format, HDMI assures that
pristine high-denition images retain the highest video
quality from the source all the way to your television
screen. Use the HDMI input for your AV Equipment
such as Set-Top-Boxes or DVD players equipped with
an HDMI output connection.
NOTE
NOTES
NOTES
HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
The HDMI input is not intended for use with •
personal computers.
Only DTV formats such as 1080p, 1080i, •
720p, 480i and 480p are available for HDMI
input.
Optical Out (Digital Audio)
This jack provides Digital Audio Output from a HDMI
source or digital program channel to your audio device
that is Dolby® Digital and PCM compatible, such as an
audio amplier.
*Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
IR Out
This jack provides IR output to your external components
(VCR, Cable box, DVD player, etc.). This connection will
allow you to control the external components with their
original remote through your Hitachi Plasma Television.
(For more detail see page 48 and the included Easy
Graphic Guide).
Power Swivel Connector
The Power Swivel cable is connected from here to the
Table Top Stand Base swivel slot in order to use the
Power Swivel feature (see page 49).
For Special AV control use only.