35
ON-SCREEN DISPLAY
Video
Select VIDEO to adjust picture settings to your preference. You
can independently customize each of the video inputs to increase
viewing performance and pleasure depending upon the video
program being viewed. If RESET is selected, only the selected
input will reset to initial conditions.
Video
Audio
TV Guide On Screen
Channel Manager
Locks
Timers
Setup
Move SEL Select
Power Swivel
OR
Black Enhancement
Light Sensor
Color Temperature
Sharpness
Tint
Color
Black Level
White Level
Picture Mode
Video
Move SEL Select
Air
High
Off
High
50%
0
50%
50%
100%
Dynamic
Picture Mode
Use this function to choose from automatic picture settings to
optimize your TV’s performance.
Use the CURSOR buttons 1. or to highlight and select
PICTURE MODE settings (Dynamic, Day or Night).
Then press the SELECT button to set the mode and return to 2.
the Video menu or press EXIT to quit menu.
There are 3 Picture Modes available : Dynamic, Day and Night 3.
mode. Dynamic is the factory preset mode for RETAIL Energy
Saving Mode and Day is the factory preset when HOME Energy
Saving Mode is used (refer to page 48). This can be changed
by adjusting any video setting to your desire conditions. Day
can be used as a second video setting for daytime viewing.
Night is set to optimize programing during nigthtime.
Other Video Menu Settings Adjustment
Use the CURSOR PAD or to highlight the function to be
adjusted.
Press the SELECT button or the CURSOR PAD 1. to select the
function settings.
Press the CURSOR PAD 2. or to adjust the function.
Press MENU to return to main menu.3.
Press EXIT to quit menu.4.
White Level
Use this function to change the white level in the picture.
Black Level
Use this function to change the black level in the picture.
Color
Use this function to adjust the level of color in the picture.
Tint
Use this function to adjust esh tones so they appear natural.
Sharpness
Use this function to adjust the amount of ne detail in the picture.
Color Temperature
Set this to High for cooler color with more blue, set to Medium
for more natural color, set to Standard for accurate color or set to
D. Cinema for color to match the cinema accurately.
Light Sensor
When on, the light sensor will automatically adjust the contrast
setting according to brightness of the room. Select off to manually
adjust the contrast setting.
When the Light sensor function is set to ON, Contrast
Mode (see below) will be disabled (grayed out).
Black Enhancement
Use this function to enhance the shadow detail in dark scenes
using the settings off, low, middle and high.
If WHITE LEVEL is selected, you are adjusting •
WHITE LEVEL. The additional menu items BLACK
LEVEL, COLOR, TINT, and SHARPNESS can be
selected and adjusted in the same manner.
It may be necessary to adjust TINT to obtain •
optimum picture quality when using the
COMPONENT VIDEO Y-PBPR input jacks.
CABLE and AIR share a Video setting. Also, each •
of the video inputs have their own independent
settings.
CTI
LTI
Gamma
Color Space
Auto Movie Mode
MPEG-NR
Cross Color NR
Noise Reduction
Contrast Mode
Video
Move SEL Select
Air
Off
Off
Min
Vibrant
Off
Off
Off
Off
Dynamic
Contrast Mode
Use this function to choose between two Contrast Mode settings.
Set to DYNAMIC for more contrast and set to NORMAL for a more
cinematic lm like image.
Noise Reduction
The NOISE REDUCTION function automatically reduces
conspicuous noise in the picture without degrading picture quality.
Set NOISE REDUCTION to OFF if you see individual block in the
picture.
Cross Color NR
The Cross Color NR (Noise Reduction) function automatically
reduces cross color noise in the picture. Choose between two
different levels (Low, High) or select OFF to disable this function.
NOTES
NOTE