ATTACHIN THE AIR PURIF IN FILTERS

!CAUTION

Cleaning and maintenance must be carried out when fi lter lamp lights. Before cleaning, stop operation and switch off the power supply.

1

2

3

4

Open the front panel

●Pull up the front panel by holding it at both sides with both hands.

Remove the pre-filter

●Push upward to release the claws and pull out the fi lter.

Attaching the air purifying filters

●Attach the air purifying fi lters to the frame by gently compress its both sides and release after insertion into pre-fi lter frame.

!CAUTION

Do not bend the air purifying filter as it may cause damage to the structure.

Attach the pre-filters

●Attach the pre-fi lters by ensuring that the surface written “FRONT” is facing front.

●After attaching the pre-fi lters, push the front panel at three arrow portion as shown in fi gure and close it.

Claws (4 places)

NOTE

● In case of removing the air purifying fi lters, please follow the above procedures.

●The cooling capacity is slightly weakened and the cooling speed becomes slower when the air

purifying fi lters are used. So, set the fan speed to "HIGH" when using it in this condition.

●Air purifying fi lters are washable and can be use in 1 year time. Type number for this air purifying filter is <SPX-CFH7>. Please use this number for ordering when you want to renew it.

●Do not operate the air conditioner without pre-fi lter. Dust may enter the air conditioner and fault may occur.

– 16 –