COOLIN OPERATION

Use the device for cooling when the outdoor temperature is 21 ~ 43°C.

If indoor humidity is very high (over 80%), some dew may form on the air outlet grille of the indoor unit.

ENGLISH

1

2

3

Press the button so that the display indicates (COOL). Cooling operation starts with a beep.

The cooling function does not start if the temperature setting is higher than the current room temperature (even though

the (OPERATION) lamp lights). The cooling function will start as soon as you set the temperature below the current room temperature.

Set the desired FAN SPEED with the(FAN SPEED) button (the display indicates the setting).

(AUTO): The FAN SPEED is HI at fi rst and varies to MED or LOW automatically when the preset temperature has been reached.

(HI)

: Hi fan speed mode.

(MED) : Medium fan speed mode.

(LOW) : Low fan speed mode.

Set the desired room temperature with the TEMPERATURE button (the display indicates the setting).

The range of 25 ~ 28°C is recommended as the room temperature for cooling.

If the temperature setting is 27°C, the room temperature will be controlled at around 27°C.

The temperature setting and the actual room temperature may vary somewhat depending on conditions.

STOP Press the (STOP) button to stop operation.

As the settings are stored in memory in the remote controller, you

only have to press the (COOLING) button to repeat the same setting next time.

– 7 –