2.3Graphical User Interface (GUI)

2.3.7.7DETECTOR Window

This window switches and controls detectors.

Detector selection control

ABCC link check box

Detector control area

Fig. 2.3-31 DETECTOR Window

(1)Detector selection control

This control switches detectors.

(2)ABCC link check box

If this box is checked, switching detectors automatically executes ABCC.

With the BSE selected, switching the BSE mode or modifying gains also automatically executes ABCC.

(3)Detector-only control area

If a detector-only control selected on the DETECTOR control is available, the control is displayed in this area. The figure above indicates the situation where a BSE detector is selected.

2.3.7.8IMAGE SHIFT Window

Indicates the present value of image shift with yellow cross mark.

Clicking the Reset resets image shift at the mid-point of the movable range.

Fig. 2.3-32 IMAGE SHIFT Window

2 - 44